W050 Charnwood tilt arbore spindle moulder complete with sliding table 2.8kw 230volt

• 2.8kW Induction Motor with Brake
• Four Speeds with Digital read-out
• Sliding Beam 48″ Capacity
• Cast Iron Main Table
• 45 degree Backwards Tilting Spindle
• Independently Adjustable Fences
• Optional Outrigger with Squaring Arm
• Reversible Spindle Direction

A large precision ground cast iron table forms the main table, with a sliding beam in front, which includes a mitre fence and work clamp as standard equipment.

A mechanically braked motor offers ample power to use tooling up to 200mm in diameter with a choice of four speeds to allow a wide range of tooling to be used. A digital speed display informs the operator of the current setting. Further versatility is provided by the backwards tilt facility. The spindle hood is of cast alloy and is fitted with long, fully adjustable fences, a vertical hold down, front clamp and a 100mm dust outlet. A hinged lid allows for easy access when setting the tooling.

Supplied with set of spindle spacers, table inserts (80mm, 110mm & 150mm), 2.0m power cable with fitted 16amp plug.

The optional outrigger table with telescopic support arm is ideal for those working with larger panels or longer lengths of timber. A squaring arm can be set to any angle and has a flip-over sliding length stop graduated in millimetres up to 1500mm.

The optional Ring Fence allows safe working when putting an edge moulding onto curved shaped pieces. It consists of a round fence to control the depth of cut, a transparent cutter guard, a lead in guide and a 100mm diameter extraction outlet.

A 16amp, 240v electric supply is required to run this machine.

Charnwood W050 Specification