Charnwood W583 Trade Quality Planer Thicknesser 250mm + W522 Wheel Base + W583/1 Planer Blades

£1,208.90 Inc. VAT

SKU: W583-1-1
Free Delivery On This Item

BRIEF DESCRIPTION

W583 Charnwood planer thicknesser plus W522 wheel base plus set (3) W583/1 HSS planer blades.

This heavy duty planer thicknesser has a lot of nice features such as 3 knife cutter block with rack and pinion rise and fall on the thicknesser table, long planer tables machine ground and  a large 1500watt 2hp quiet running induction motor that will run off a 13amp supply (plug fitted).

It is essential to use dust extraction with a planer thicknesser. The extractor removes all the dust and chips which will otherwise build up, causing a blockage and eventually damage to the machine. Using an extractor also increases the life of the knives.

SKU: W583-1-1 Categories: ,

PRODUCT VIDEO

YouTube video

Description

W583 Planer thicknesser with 3 knife block plus W522 Wheel base plus set of three W583/1 HSS planer blades.

 Cast iron construction, runs on standard 13amp supply.

Specification.

A solid and well finished planer thicknesser for the busy workshop.

  • Precision Ground Cast Iron Beds
  • 2hp Induction Motor
  • 3 Knife Cutterblock for Superior Finish
  • 10” Planing Capacity
  • 10” x 7” Thicknessing Capacity
  • Rubber Coated Outfeed Roller
  • 100mm diameter Dust Extraction Outlet
  • Optional Wheel Base Available

Precision ground cast iron beds and a long tilting fence which can be positioned at any point across the table make this machine a delight to use. The 3 knife cutterblock is powered by a 2hp induction motor and is capable of a cut up to 5mm deep in a single pass.

To gain better visibility and access for thicknessing, both of the planing beds are hinged and swing out of the way, without using any tools. A dust hood / cutter gaurd is then swung into position and the conversion to Thicknesser is complete.

The feed roller drive, which features a rubber outfeed roller, can be disengaged during planing operations to save motor power and general wear on the machine.

Supplied with 3 knives, 100mm dust extraction outlet, 4 adjustable feet, 1.6m power cable and UK 13 amp plug.
Our planer thicknesser will run off any standard 13amp supply.

  • Extra carriage charges may apply to Scottish Highlands, please enquire.
Surfacing width 250mm (10″)
Length of surfacing tables 1085mm
Maximum depth of cut 5mm
Fence tilt 90 – 45 degrees
Table height 856mm
Thicknessing capacity 5-195mm (1/4″-7″)
Length of thicknessing table 600mm
Feed speed 5.5m/min
Maximum depth of cut 2.5mm
Cutterblock speed 4000rpm
Number of knives 3
Motor ( induction) 1500w (2hp)
Dimensions (WxDxH) 1100mm x 780mm x 1050mm
Weight 150kg
Assembly Time Required 45 Minutes (Needs 2 People)
Rating Trade
Product Guarantee 5 Years

It is essential to use dust extraction with a planer thicknesser. The extractor removes all the dust and chips which will otherwise build up, causing a blockage and eventually damage to the machine. Using an extractor also increases the life of the knives.

You may also like…

  • Free Delivery - Kendal Tools

    Charnwood W691 Large Workshop Extractor PLUS PACK (10) COLLECTION BAGS

    £349.90 Inc. VAT
    View Product
  • W522 Adjustable Wheel Base

    W522 Adjustable Universal Wheel Base

    £69.90 Inc. VAT
    View Product