Covid-19 Update: Mail Order is Business As Usual, Click Here for more information

Charnwood W583 Trade Quality Planer Thicknesser 250mm Cast Iron Construction

£1,209.90 Inc. VAT

W583 Charnwood planer thicknesser.

This heavy duty planer thicknesser has a lot of nice features such as 3 knife cutter block with rack and pinion rise and fall on the thicknesser table, long planer tables machine ground and  a large 1500watt 2hp quiet running induction motor that will run off a 13amp supply (plug fitted).

It is essential to use dust extraction with a planer thicknesser. The extractor removes all the dust and chips which will otherwise build up, causing a blockage and eventually damage to the machine. Using an extractor also increases the life of the knives.

Brands:Charnwood

W583 Planer thicknesser with 3 knife block.              

  Runs on standard 13amp supply.

Specification.

A solid and well finished planer thicknesser for the busy workshop.

  • Precision Ground Cast Iron Beds
  • 2hp Induction Motor
  • 3 Knife Cutterblock for Superior Finish
  • 10” Planing Capacity
  • 10” x 7” Thicknessing Capacity
  • Rubber Coated Outfeed Roller
  • 100mm diameter Dust Extraction Outlet
  • Optional Wheel Base Available

Precision ground cast iron beds and a long tilting fence which can be positioned at any point across the table make this machine a delight to use. The 3 knife cutterblock is powered by a 2hp induction motor and is capable of a cut up to 5mm deep in a single pass.

To gain better visibility and access for thicknessing, both of the planing beds are hinged and swing out of the way, without using any tools. A dust hood / cutter gaurd is then swung into position and the conversion to Thicknesser is complete.

The feed roller drive, which features a rubber outfeed roller, can be disengaged during planing operations to save motor power and general wear on the machine.

Supplied with 3 knives, 100mm dust extraction outlet, 4 adjustable feet, 1.6m power cable and UK 13 amp plug.
Our planer thicknesser will run off any standard 13amp supply.

  • Extra carriage charges may apply to Scottish Highlands & Islands, please enquire.
Surfacing width 250mm (10″)
Length of surfacing tables 1085mm
Maximum depth of cut 5mm
Fence tilt 90 – 45 degrees
Table height 856mm
Thicknessing capacity 5-195mm (1/4″-7″)
Length of thicknessing table 600mm
Feed speed 5.5m/min
Maximum depth of cut 2.5mm
Cutterblock speed 4000rpm
Number of knives 3
Motor ( induction) 1500w (2hp)
Dimensions (WxDxH) 1100mm x 780mm x 1050mm
Weight 150kg
Assembly Time Required 45 Minutes (Needs 2 People)
Rating Trade
Product Guarantee 5 Years

 

It is essential to use dust extraction with a planer thicknesser. The extractor removes all the dust and chips which will otherwise build up, causing a blockage and eventually damage to the machine. Using an extractor also increases the life of the knives.

 

Enquire Now
Shopping cart
There are no products in the cart!
Continue shopping
Call Now Button