Charnwood BD46 Belt and Disc Sander, 4″ wide belt x 6″ dia disc
£145.99 Inc. VATSKU: BD46
BD46 Belt & Disc Sander, 4″ wide belt x 6″ dia disc.
This Charnwood BD46 belt and disc sander is a great addition to the woodwork shop, the 4″ wide belt and 6″ diameter disc is ideal for finishing off leaving
a nice tidy smooth finish plus you can use the roller end for any shaped work.
BD46 Belt & Disc Sander, 4″ wide belt x 6″ dia disc
The most popular sized combination sander for the Extractors.
- 450w Quiet Induction Motor
- 6″ Diameter Sanding Disc
- 4″ x 36″ Sanding Belt
- Vertical or Horizontal Use
- Tilting Work Table With Mitre Guide
- Dust Extraction Outlets on Both Functions
The design has been updated and simplified from the traditional belt driven sander. Both the belt & disc functions are powered directly from the motor shaft.
The disc sander side has a 150mm diameter disc complimented by a solid one piece aluminium work table with 45 degree tilt. A mitre guide fits onto a slot in the work table allowing the disc to be used for accurate sanding of square edges as well as bevels, mitres and even compound angles. A dust extraction outlet is provided to connect to a suitable vacuum or extractor.
The sanding belt can be used in horizontal or vertical mode. It can also be locked at any angle in between, sometimes more comfortable for sharpening tools.
When used horizontally for face sanding the belt is fitted with a back stop. This can be quickly removed and replaced with the work table.
The open drum end of the belt can be used for sanding curved edges, cut on a bandsaw or scroll saw.
When the time comes to replace the sanding belt there is a quick release tension lever and tracking adjustment to balance the new belt.
The sander sits on 4 rubber feet to provide a stable platform. It can also be secured to a work bench using the 2 mounting points provided.
Supplied with mitre fence, 1 x 80 grit sanding belt, 1 x 80 grit self adhesive sanding disc, 1.9m power cable & UK 3 pin plug.
Unlock the benefits of Hook & Loop sanding discs. For a limited time we are giving away with each machine, worth £8.00:
- Hook & Loop Conversion Pad VB150
- 60 grit ProNet sanding disc
- 80 grit ProNet sanding disc
- 120 grit ProNet sanding disc
- 150 grit ProNet sanding disc
These are in addition to the the standard equipment.
|100mm x 915mm (4″ x 36″)
|Motor (Induction) 240v, 50hz
|Work Table Size
|195mm x 35mm
|Work Table Tilt
|90 to 45 degrees
|Work Table Guide Slot
|Dust Extraction Outlet x 2
|37mm OD, 31mm ID
|Overall Dimensions (WxDxH)
|550mm x 530mm x 200mm
|530mm x 580mm x 270mm
|Assembly Time Required
- Extra carriage charges may apply to Scottish Highlands & Islands, please enquire.
We recommend wearing a face mask or respirator during all sanding operations, even if a dust extraction system is in place. Don’t take chances with your health.