W796 Portable Dust Extractor Professional Quality 1hp motor 230Volt

Charnwood W796 Dust extractor.

The W796 is a portable dust and chip extractor, aimed at the professional workshop needing to extract from one machine at a time.

• Professional Quality Motor
• Can Run up to 8 Hours a Day
• Ample 1000m³/hour Flowrate
• Quiet Induction Motor
• Transparent Collection Bag
• 2m Length of Hose Included

Highly recommended for MDF users this unit is suitable for fine dust or chip producing machinery such as double mitre saws, sanders, routers, table saws, bandsaws and spindle moulders.

Using the now upgraded 2 micron fine mesh cotton filtration bag and a see through heavy gauge plastic collection bag both fastened by quick release metal straps, the workshop will be not only a cleaner environment but a healthier one as well.

Supplied with ‘indestructible’ steel fan, 2m length of 100mm diameter flexible hose, 2 hose clips, 100mm inlet, transparent collection bag, 4 steering castors, 1.6m power cable and UK 3 pin plug. Runs on a standard 13 amp fused supply.

Please Note : Hose is Left Hand thread so for quick connector use: 100QCL

Charnwood W796 Specification

Motor (Induction)	750w (1hp)
Voltage	240v, 50hz
Airflow (Without Bag)	1000 m3/hour (750cfm)
Max. Static Pressure	127mmAq
Inlet Diameter	100 mm
Bag Capacity	70 Litres
Collector Drum Diameter	370mm
Noise Rating (@3m)	75dB
Dimensions (WxDxH)	780mm x 390mm x 1370mm
Weight	28 Kg
Assembly Time Required	45 Minutes
Rating	Trade
Product Guarantee	5 Years

We also have a large range of accessories available for connecting your dust extractor to the dust producing machinery. Reducers to join the 100mm diameter hose to the smaller diameter outlets usually found on bench top machinery. Hoods to collect dust from machinery with no purpose made collection points.

An optional upgrade for this dust extractor is the 1 micron Filter Cartridge for the ultimate in filtering performance.