Charnwood BS410 10″ Woodworking Bandsaw 0.5hp motor. Bench top version.

£285.90 Inc. VAT

SKU: BS410
Free Delivery On This Item


BS410 Bandsaw machine bench top version machine from Charnwood comes with a quiet running .05hp induction motor, it has an extendable right hand table support for wide pieces of wood plus roller blade guides for accuracy. The BS410 comes complete with a mitre guide and a cam action locking rip fence.

SKU: BS410 Categories: ,


A bench-top woodworking bandsaw with a 4” cutting capacity.

  • Precision Ground Cast Iron Work Table
  • Quick Action Locking Rip Fence
  • Supplied with High Quality British Made Blade
  • Quiet Induction Motor
  • Crosscutting Mitre Guide Included
  • 4” Cutting Depth Capacity
  • 10” Cutting Width (Throat)
  • Quick Action Blade Tension Setting
  • Primarily used for Woodworking
  • Extra carriage charges may apply to the Scottish Highlands, please enquire.

A small-sized woodworking bandsaw with a durable precision ground cast iron tilting table with a stop for returning to 90 degrees, after a bevel cut, and T shaped mitre fence slot. When working with larger pieces there is a sliding table extension support adding 100mm to the table width.

The quick-release fence locks securely onto the front rail of the table to provide a rigid straight guide for ripping. A magnifier is included to aid accurate setting of the fence along the scale, marked out in mm. The fence can be fitted on either side of the blade.

The sliding mitre fence is adjustable 60 degrees in each direction, for crosscutting wood at any angle.

The rack & pinion blade guard design is adjusted by using a dial on the side of the machine. The blade is then guided by two side-facing bearings and a rear thrust bearing attached to the end of the guard. The side bearings are mounted on an eccentric cam, for faster setting, and can be adjusted without using any tools. The same guide set-up is repeated below the table giving maximum blade control and keeping the blade true when a straight cut is required.

A safety feature, only usually found on larger bandsaws, is the addition of micro switches on the doors to prevent accidental startup when changing a blade.

Replacing a worn blade, or switching to the blade you keep for curved work, has been sped up by adding a quick-release tension lever. The lever removes all tension from the blade to quickly remove it from the bandsaw. When the new blade is in position, return the lever to add the tension.

Finished off with a durable powder-coated paint finish.

Supplied with rip fence, mitre fence adjustable 60 degrees each way, 3/8″ high quality British made blade, NVR switch, 100mm diameter extraction outlet, push stick, 2.0m power cable and UK 3 pin plug.

Fixing holes are provided for mounting onto a bench or onto the optional floor stand.

This Bandsaw is fitted with a high-quality, British-manufactured blade with precision ground teeth for incredible cutting results.

Maximum cutting depth 100mm (4″)
Throat width 245mm (10″)
Max. cutting width with fence 130mm Left / 130mm Right
Table size 340mm x 335mm
Table size with extension 490mm x 335mm
Table tilt 0-45 degrees
Mitre Guide T-Slot 9mm / 14mm
Cutting speed 730m/min
Motor (induction) 370w (1/2hp)
Blade length 1712mm (67.4″)
Blade widths 6-13mm (1/4″ – 1/2″)
Bench to Work Table 380mm
Floor to Work Table (With Stand) 1050mm
Dust Collection Port 100mm (4″) Dia.
Dimensions (WxDxH) 570mm x 500mm x 840mm
Dimensions (WxDxH) (With Stand) 670mm x 550mm x 1500mm
Weight 30Kg
Rating Hobby
Product Guarantee 5 Years

The primary use of this bandsaw is for woodworking and the blade supplied is suitable for cutting both hard and soft wood. It is possible to use this bandsaw for cutting metal, but only with the correct blade fitted. (Not supplied).

You may also like…

  • Charnwood DC50 - Kendal Tools

    Charnwood DC50 Fine Filter Dust Extractor

    £110.99 Inc. VAT
    View Product
  • LED Light with Flexi-shaft and Magnetic Base

    LED Light with Flexi-shaft and Magnetic Base

    £37.35 Inc. VAT
    View Product
  • Bandsaw Blades

    67 1/2″(1712mm) Bandsaw blades

    £11.38£12.60 Inc. VAT
    View Product