Reduced Price

Charnwood B250 – 10″ Bandsaw complete on legstand and W522 Wheel Base.

£412.90 Inc. VAT

SKU: B250
Free Delivery On This Item


Charnwood B250 – 10″ Bandsaw complete on leg stand and W522 Wheel Base.

Wheel base included.


SKU: B250 Categories: ,


YouTube video


 B250 – 10″ Premium bandsaw complete with Built-in light-Tool holder-quick Release Fence-Dust tray  & Wheel Base

For spare 1826mm blades click here

Charnwood B250 – 10″ Bandsaw complete on leg stand and W522 Wheel Base.

  • Huge 6″ Cutting Depth Capacity
  • 10′ Cutting Width (Throat)
  • Supplied with high-quality British Made Blade
  • Precision Ground Cast Iron Work Table
  • Quick Action Lock On Rip Fence
  • Crosscutting Mitre Guide Included
  • Quiet Induction Motor
  • Mains Powered LED work Light
  • Integral Dust Collection Tray
  • Includes Floor stand and W522 wheelbase
  • Primarily used for Woodworking

A compact floor-standing woodworking bandsaw with a massive cutting capacity, for a machine of this size and price, of 150mm (6″). The big capacity makes it an ideal choice for woodworkers who are short on space. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel. The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides. The B250 has three sealed bearings on the blade guard. Two mounted side-on to the blade to control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely. The same setup is then repeated beneath the table.

The cast iron table tilts from 90 degrees to 45 degrees and has a positive stop at both of those positions. Any angle in between can be read off the scale and locked in. For rip cuts the guide fence can be situated on either side of the blade, can be locked into position with a single press of the lever, and has a clear marker to set against the metric scale. The fence itself can be fitted in two ways. When cutting thicker material the full face height of 60mm is used. When cutting thin and narrow strips the fence is fitted with a small face, against the blade to allow clearance around the guides.

The two doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning.

A dust extractor is always recommended when using a bandsaw. The dust collection outlet has 3 rings which allow it to accept 3 sizes of hose, 50mm, 75mm & 100mm diameter making it compatible with any type of extraction system. If extraction is not being used however, the bandsaw is fitted with an integral dust collection draw. Dust falling into the base of the machine will be collected here, allowing it to be quickly and easily emptied.

Supplied with 3/8′ x 6tpi blade, rip fence, mitre fence, work light, floor stand, cable and plug.

This Bandsaw is fitted with a high-quality, British-manufactured blade with precision ground teeth for incredible cutting results.

  • Extra carriage charges may apply to the Scottish Highlands, please enquire.
Maximum cutting depth 150mm (6″)
Throat width 245mm (10″)
Max. cutting width with fence 105mm Left / 120mm Right
Table size 360mm x 320mm
Table Height 940mm
Table tilt 90-45 degrees
Mitre Guide T-Slot 8.5mm / 14mm
Cutting speeds 400 & 800m/min
Motor (induction) 375w (1/2hp)
Blade length 1826mm
Blade widths 6-13mm (1/4″ – 1/2″)
Dimensions (WxDxH) 670mm x 530mm x 1450mm
Weight 41Kg
Assembly Time Required 45 Minutes
Rating Light Trade
Product Guarantee 5 Years

.The primary use of this bandsaw is for woodworking and the blade supplied is suitable for cutting both hard and soft wood. The blade supplied can also cut Non-ferrous metals, Plastic and Acrylic. It is possible to use this bandsaw for cutting other materials, but only with a suitable blade fitted.

You may also like…

  • Reduced Price Free Delivery - Kendal Tools

    Charnwood DC50AUTO Fine Filter Dust Extractor With Automatic Start Socket 230volt

    £136.99 Inc. VAT
    View Product
  • 1826mm Bandsaw Blades

    1826mm Bandsaw Blades

    £11.38£12.44 Inc. VAT
    View Product
  • Charnwood DC50 - Kendal Tools

    Charnwood DC50 Fine Filter Dust Extractor

    £110.99 Inc. VAT
    View Product