93 1/4″ (2370mm) Narrow Bandsaw Blade

This 2370mm narrow bandsaw blade has a blade length of 93 1/4" (2370mm). Manufactured in the UK with hardened hook teeth and a flexible back, it is suitable for cutting wood, plastic and non-ferrous metals.

Compatible machines: Record BS300; Record BS300/E/X.

• Narrower blades suit tighter curves and detailed work.
• Wider blades suit straighter cuts and resawing.
• Lower TPI suits thicker timber and faster cutting.
• Higher TPI suits thinner material and finer finishes.

Other widths and tooth options are available on enquiry.

Over 2270 mm (89 3/8") long: £6.95, any quantity.

Check the blade length specified in your machine manual or on your existing blade before ordering. The listed length identifies the blade size; width and teeth per inch (TPI) are separate choices. Select a width supported by your machine and suitable for the cuts you intend to make.

For curved work, consider the tightest curve in your design when choosing blade width. For straight cuts and resawing, choose an appropriate wider blade within your machine’s limits. Match TPI to the thickness of the timber and the finish you need. If you are unsure, tell our team your machine model, material thickness and intended use so we can help you choose.

View our bandsaw blade range for other available lengths.

For this 2370mm narrow bandsaw blade, the product lists the following choices:

• Blade width: 3mm (1/8"), 4.7mm (3/16"), 6mm (1/4"), 10mm (3/8"), 13mm (1/2"), 16mm (5/8"), 20mm (3/4"), 25mm (1"), 32mm (1¼")
• Tooth option: 3 TPI, 3 Ex Set, 4 TPI, 6 TPI, 8 TPI, 10 TPI, 14 TPI, 18 TPI, 24 TPI

Select your required width and tooth option on the product page. Check that the combination you need is available before adding it to your basket. If your preferred option is not shown, contact us to discuss it. The blade length remains 2370mm whichever listed width and tooth combination you choose.

Start with the material and thickness you intend to cut, then consider whether the job involves straight cuts, curves or a mixture of both. This gives you a useful basis for choosing from the listed widths and tooth options. Keep the requirements of your bandsaw in mind throughout, as the machine must support the blade you select.

A 2370mm narrow bandsaw blade identifies a particular length, but length alone does not decide the finish or the type of cut. For mixed workshop tasks, it can be useful to keep a record of the width and TPI that worked for each job. When reordering, compare those details with the selected options rather than relying only on a previous blade’s appearance.

What if my machine is not listed?

Check the blade length in your machine manual and confirm the permitted width range. The machine examples in a product listing are a starting point. If you need help identifying a replacement, send us the make, model and blade details so we can check your enquiry against the product information.

Which details should I send with an enquiry?

Include the blade length, the width and tooth option you are considering, the material you want to cut and its thickness. A photograph of the markings on your existing blade or the relevant manual page can also help. If you have any questions, contact us here before ordering.

Where can I find help with blade drift or uneven cuts?

For background reading, see EPS Services’ guide to fixing bandsaw cutting problems. Use it alongside the instructions for your own machine. If you need help choosing a replacement, quote this product’s 2370mm length and the options you require when contacting Kendal Tools.