Covid-19 Update: Mail Order is Business As Usual, Click Here for more information

W791CF 2hp Professional Dust Extractor 1500w, 240v with Cartridge Filter Package

£729.99

W791CF 2hp Professional Dust Extractor 1500watt with Cartidge filter

Brands:Charnwood

W791CF 2hp Professional Dust Extractor 1500w, 240v with Cartridge Filter Package

Package includes W791 & CF2024

W791 2hp Dust Extractor

A powerful professional dust extractor with ample flow rate to extract from two machines at the same time.

  • Quiet Induction Motor
  • Up to 8 hours Continual Ruing
  • Super Fine 2 micron Filter
  • Transparent Collection Bag
  • Wheels Included For Portability

These larger collectors are ideal for locations where the extractor will be cited a long way from the dust source. The higher flowrate also allows a small system of branch lines to be fitted around the workshop to allow extraction from a variety of machines. Maximum recommended total hose length is 7 metres. We now fit as standard a super fine 2 micron filter making the unit suitable even for MDF dust. Maximum recommended total hose length is 7 metres.

Supplied with transparent collection bag, durable steel fan, NVR switch, rubber wheels, quick release metal straps and Y branch. A 16 amp supply is required to run this machine.

Hose is not supplied as standard, our 100mm diameter transparent hose is recommended, sold by the metre.

  • Extra carriage charges may apply to Scottish Highlands & Islands, please enquire.

Specification

Motor (Induction)1500w (2hp)
Voltage240v
Flowrate (cubic metres per hour)2000 m3/hour
Inlet Dimensions1 x 124mm or 2 x 100m
Bag Capacity148 Litres
Filtration2 microns
Dimensions (WxDxH)880mm x 550mm x 1920mm
Weight60 Kg
RatingIndustrial
  • Extra carriage charges may apply to Scottish Highlands & Islands, please enquire.

CF2024 Cartridge Filter

This cartridge filter can be used to upgrade any chip extractor with a 500mm diameter collection drum. Replace the cloth filtration bag with a cartridge to increase the filtration performance down to a super fine, 1 micron particle size. The extra deep pleats in the filter material, increase the surface area of the filter so that there is no loss in air flow compared to the original cloth filter.

This allows the extractor to be used for operations which produce very fine dust such as sanding and cutting MDF. The particle size of fine woodworking dust is generally between 2 and 3 microns. Research shows 99% of wood dust, produced by machining softwood, hardwood or MDF, is within that range.  The extractor can still be used with all the normal workshop machines which produce dust and chips, such as: bandsaws, table saws, planers, thicknessers and spindle moulders.

The cartridge is very simple to install, simply remove the cloth bag and support arm on the extractor then fit the cartridge in its place. A metal quick action clamp secures the cartridge in place.

To ensure a long life without any deterioration in performance the filter includes an internal cleaning device. Gently rotating the handles after each use, moves the internal paddles which clean the inside of the filter and prevent clogging.

Supplied with metal fixing clamp and foam insert to ensure a good seal against the collector drum.

  • Extra carriage charges may apply to Scottish Highlands & Islands, please enquire.
Call Now Button
Enquire Now
Shopping Basket
There are no products in the cart!
Subtotal
£0.00
Total
£0.00
Continue Shopping