Reduced Price

W629 Charnwood 10″ Table saw 75mm deep plus sliding table and extension Complete with W522 Wheel kit.

Original price was: £995.99.Current price is: £989.99. Inc. VAT

SKU: W629-1
Free Delivery On This Item

BRIEF DESCRIPTION

W629 Charnwood 10″ Table saw with sliding table and extension Complete with W522 Wheel kit.

This Charnwood W629 10″ diameter blade table saw is a great option for the home enthusiast  or serious wood worker who needs a larger depth of cut (70mm) than the smaller W619 model.

It has a sliding table, right hand panel attachment, rip fence guide and mitre guide plus dust extraction outlet at rear.  If you are stuck for space there are 3 ways to configure the table saw:

The sliding carriage can be fitted on either side of the blade so that you can work on the left or right.
If you are not using the sliding carriage, you can fit one extension table on either side of the blade.

For compact storage the extension tables and sliding carriage can be quickly removed, (2 minutes). They reassemble without any further setting up required.

 

 

PRODUCT VIDEO

Description

W629 Charnwood 10″ Table saw 75mm deep cut plus sliding table and extension complete with W522 Wheel kit.

Description

10″ Cast iron table saw.

  • Quiet Induction Motor
  • Cast Iron Precision Ground Table
  • Extension Tables as Standard Equipment
  • Sliding Carriage as Standard Equipment
  • Separate Handwheels for Blade Adjustment
  • 100mm Dust Extraction Outlet
  • Solid Floor stand Base Included
  • An ideal machine for a home workshop with a mobile wheelbase for easy movability, works off a 13amp plug.

First launched in 2015, the W629 has now become our best-selling table saw model. The cutting capacities are big enough for any hobby workshop, providing a level of accuracy only normally found on industrial machinery, with a compact footprint suited to the average-sized workshop.

The main table is precision ground cast iron, and has 2 fabricated side extension tables to give impressive cutting capacities, perfect for the smaller workshop. The induction motor turns the blade via a drive belt which reduces noise and increases accuracy.

Blade height and blade angle are controlled using 2 separate hand wheels. The sliding carriage, included as standard, is a pleasure to use with a cast iron bed travelling on 4 bearing guides. Any angle can be set on the long support fence. A screw clamp holds the work secure and a flip-over length stop is fitted for repeat cuts.

Supplied with 36-tooth TCT sawblade, sliding carriage, extension tables, sliding mitre fence, floor stand, adjustable feet, 1.7m power cable, and UK 3-pin plug.

There are 3 ways to configure the table saw:
The sliding carriage can be fitted on either side of the blade so that you can work on the left or right.
If you are not using the sliding carriage, you can fit one extension table on either side of the blade.

For compact storage the extension tables and sliding carriage can be quickly removed, (2 minutes). They reassemble without any further setting up required.

Specification

Main Table Size 420mm x 635mm
Table Size (with Extensions) 1000mm x 635mm
Maximum Ripping Width Using Fence 730mm
Crosscut Table Size 400mm x 180mm
Maximum Crosscutting Width 500mm (680mm using reverse table)
Blade Tilt 90 – 45 degrees
Cutting Depth at 90 degrees 80mm
Cutting Depth at 45 degrees 64mm
Blade Diameter 250mm
Blade Bore 30mm
Work Table Height 845mm
Mitre Guide T-Slot Width 15/19mm
Mitre Guide T-Slot Depth 7mm
Motor (induction) Braked 2200w (3hp) / 240v
No-Load Blade Speed 4000 rpm
Minimum Blade Width (Kerf) 3.0mm
Dimensions (WxDxH) 1480mm x 1000mm x 1100mm
Weight 110Kg
Assembly Time Required 60 Minutes (Needs 2 People)
Rating Light Trade
Product Guarantee 5 Years

It is highly recommended that a dust extractor is used at all times with this saw to prevent the harmful build-up of dust and chips. The hose kit supplied collects dust from the saw guard and takes it to the single 100mm diameter hose connection point at the back of the machine.

Please note: It is not possible to use a stacked dado set with this saw.

Extra carriage charges may apply to the Scottish Highlands, please enquire.

It is highly recommended that a dust extractor is used at all times with this saw to prevent the harmful build-up of dust and chips. The hose kit supplied collects dust from the saw guard and takes it to the single 100mm diameter hose connection point at the back of the machine.

Order your Charnwood W629 table saw, satisfaction is guaranteed.

You may also like…

  • Charnwood W696 Dust Collector with Floor Sweeping Attachment

    £234.99 Inc. VAT
    View Product
  • Free Delivery - Kendal Tools

    Charnwood TB1048 TCT Saw Blade 250mm x 30mm x 48T x 3.0k

    £32.50
    View Product
  • Free Delivery - Kendal Tools

    Charnwood TB1060 TCT Saw Blade 250mm x 30mm x 60T x 3.0k

    £37.00
    View Product
  • Free Delivery - Kendal Tools

    Charnwood W691 Large Workshop Extractor 2hp Motor 230volt

    £339.99 Inc. VAT
    View Product