Charnwood W796CF Dust Extractor With 1 Micron Cartridge Filter + PACK (10) COLLECTION BAGS
£638.99 Inc. VATSKU: W796CF
W796CF Dust extractor with 1 micron cartridge filter complete with hose.
W796CF Dust Extractor With 1 Micron Cartridge Filter PLUS PACK TEN COLLECTION BAGS
- W796 1hp Professional Dust Extractor
- CF1519 1 Micron Cartridge Filter
W796CF is a portable dust and chip extractor aimed at the professional workshop needing to extract from one machine at a time.
- Professional Quality Motor
- Can Run up to 8 Hours a Day
- Ample 1000m3/hour Flowrate
- Quiet Induction Motor
- Transparent Collection Bag
- 2m Length of Hose Included
- 1 micron cartridge filter
The W796 is a professional level dust extractor, capable of extended running times up to 8 hours per day. This package upgrades the normal 2 micron cloth filter to a 1 micron cartridge filter.
The extra deep pleats in the filter material, increase the surface area of the filter so that there is no loss in air flow compared to the original cloth filter.
This allows the extractor to be used for operations which produce very fine dust such as sanding and cutting MDF. The particle size of fine woodworking dust is generally between 2 and 3 microns. Research shows 99% of wood dust, produced by machining softwood, hardwood or MDF, is within that range. The extractor can still be used with all the normal workshop machines which produce dust and chips, such as: bandsaws, table saws, planers, thicknessers and spindle moulders.
Supplied with ‘indestructible’ steel fan, 2m length of 100mm diameter flexible hose, 2 hose clips, 100mm inlet, transparent collection bag, 4 steering castors, 1.6m power cable and UK 3 pin plug. Runs on a standard 13 amp supply.
To ensure a long life without any deterioration in performance the filter includes an internal cleaning device. Gently rotating the handles after each use, moves the internal paddles which clean the inside of the filter and prevent clogging.
Please Note : Hose is Left Hand thread so for quick connector use 100QC
|Flowrate (cubic metres per hour)
|Collector Drum Diameter
|780mm x 390mm x 1370mm
|Assembly Time Required
- Extra carriage charges may apply to Scottish Highland, please enquire.