Charnwood W692 Two Bag Large Workshop Extractor 3hp Motor 230volt +PACK (10) COLLECTION BAGS
Out of stock
Charnwood Two Bag Large Workshop Extractor 3hp motor 230volt
Extra 100mm or 125mm diameter hose available by the metre, please enquire.
3 Inlets for simultaneous extraction. PLUS PACK TEN COLLECTION BAGS.
W692 Double bag extractor 3hp motor.
The largest extractor aimed at workshops where extraction is not continuously needed.
- Powerful & Quiet 3hp Induction Motor
- 2 Inlets For Simultaneous Extraction
- Quick Action Metal Bag Straps
- Transparent Heavy Duty Collection Bag
- 5 Micron Filter Bag
- 16amp, 240v Electric Supply Required
- Drum Bag Clips to make easy work of changing the collection bag
- Rubber Band on the Drum to give a better seal
These more powerful machines give a higher flowrate per hour which allows a longer hose length to be attached or a small system of branches and gates to be fitted around the workshop.
The largest in this range is for users who occasionally need a very high air volume. The two collection bags are filled together so that emptying is required less frequently. It can be used to collect from up to three machines simultaneously or attached to a system of branches and gates to be fitted around the workshop. Maximum recommended total hose length is 10 metres.
Supplied with 5 micron filter bags, transparent collection bags, durable steel fan, NVR switch, rubber wheels, quick release metal straps, 3 way inlet and 1.6m power cable (No plug).
A 16amp fixed electric supply is required to run this machine. We recommend using a 16amp plug.
Hose is not supplied as standard, our 100mm diameter transparent hose is recommended, sold by the metre.
This machine is intended for Light Trade use which means it has a maximum continuous running time of 2 hours, after which the motor must be rested and left to cool. If you need need a longer duty cycle than this please look at our professional heavy duty range of extractors.
|2200w (3hp), 240v
|Flowrate (cubic metres per hour)
|1 x 150mm or 3 x 100mm
|Collection bag capacity
|Maximum continuous run time
|1560mm x 550mm x 1920mm
|Assembly Time Required
The filtration level on this machine can be upgraded to 1 micron by adding 2 x CF2024 filter cartridges
- Extra carriage charges may apply to Scottish Highlands & Islands, please enquire.
You may also like…
Charnwood W791PB Polythene Collection Bag 800 x 1075mm (32” x 43”), pack of 10£13.95 View Product
CF2024 Cartridge Filter 1 Micron for 500mm Diameter Drums Suitable for W691,W692,W791 & W792 Dust Extractors£203.99 Inc. VAT View Product
Flexible Extraction Hose£6.90 – £159.00 Inc. VAT View Product