NEW Charnwood W629 10″ Cast iron Table saw with sliding table & panel cutting extension. New version with cam action locking rip fence.
W629 10″ Cast iron table saw.
- Quiet Induction Motor
- Cast Iron Precision Ground Table
- Extension Tables as Standard Equipment
- Sliding Carriage as Standard Equipment
- Separate Handwheels for Blade Adjustment
- 100mm Dust Extraction Outlet
- Solid Floorstand Base Included
- Optional Wheel Kit
First launched in 2015, the W629 has now become our best selling table saw model. The cutting capacities are big enough for any hobby workshop, providing a level of accuracy only normally found on industrial machinery, with a compact foot print suited to the average sized workshop.
The main table is precision ground cast iron, and has 2 fabricated side extension tables to give impressive cutting capacities, perfect for the smaller workshop. The induction motor turns the blade via a drive belt which reduces noise and increases accuracy.
Blade height and blade angle are controlled using 2 separate hand wheels. The sliding carriage, included as standard, is a pleasure to use with a cast iron bed travelling on 4 bearing guides. Any angle can be set on the long support fence. A screw clamp holds the work secure and a flip over length stop is fitted for repeat cuts.
Supplied with 36 tooth TCT sawblade, sliding carriage, extension tables, sliding mitre fence, floor stand, adjustable feet, 1.7m power cable and UK 3 pin plug.
There are 3 ways to configure the table saw:
The sliding carriage can be fitted on either side of the blade so that you can work on the left or right.
If you are not using the sliding carriage, you can fit one extension table on either side of the blade.
For compact storage the extension tables and sliding carriage can be quickly removed, (2 minutes). They reassemble without any further setting up required.
|Main Table Size||420mm x 635mm|
|Table Size (with Extensions)||1000mm x 635mm|
|Maximum Ripping Width Using Fence||730mm|
|Crosscut Table Size||400mm x 180mm|
|Maximum Crosscutting Width||500mm (680mm using reverse table)|
|Blade Tilt||90 – 45 degrees|
|Cutting Depth at 90 degrees||80mm|
|Cutting Depth at 45 degrees||64mm|
|Work Table Height||845mm|
|Mitre Guide T-Slot Width||15/19mm|
|Mitre Guide T-Slot Depth||7mm|
|Motor (induction) Braked||2200w (3hp) / 240v|
|No-Load Blade Speed||4000 rpm|
|Minimum Blade Width (Kerf)||3.0mm|
|Dimensions (WxDxH)||1480mm x 1000mm x 1100mm|
|Assembly Time Required||60 Minutes (Needs 2 People)|
|Product Guarantee||5 Years|
It is highly recommended that a dust extractor is used at all times with this saw to prevent the harmful build up of dust and chips. The hose kit supplied collects dust from the sawguard and takes it to the single 100mm diameter hose connection point at the back of the machine.
Please note: It is not possible to use a stacked dado set with this saw.
- Extra carriage charges may apply to Scottish Highlands & Islands, please enquire.
Order your Charnwood W629 table saw, satisfaction guaranteed.