Covid-19 Update: Mail Order is Business As Usual, Click Here for more information

Charnwood W588 8″ wide x 5″ deep Planer thicknesser.

£248.80

Out of stock

W588 Charnwood 200mm planer thicknesser.

This very popular W588 planer thicknesser is one of our best sellers, it planes up to 8″ wide and thicknesses up to 5″ deep, it leaves a very smooth finish so you do not have a lot of sanding to do afterwards.

It weighs only 28kg so it is easy to store or take out on site, the tables are machined ground flat and the fence tilts for planing bevels, in all a great bit of kit to add to your workshop.

Brands:Charnwood

Charnwood W588  8″ wide x 5″ deep Planer thicknesser.

A compact and portable planer thicknesser which is light enough to move off the bench when not in use and yet tough enough to produce 8″ x 5″ timber into flat and dimensioned pieces. The plaing beds are precision ground aluminium and the guide fence is a rigid aluminium extrusion which can be tilted and locked at any angle up to 45 degrees when required. The steel thicknessing bed has an extension arm on the outfeed side and is supported in each corner by chain driven adjusting screws.

Once the height is set, rubber coated feed rollers pass the timber through the cutter. The dust hood is particularly good, fitting on top of the thicknessing bed during planing operations and then moved over the top when thicknessing. A location sensor detects that the dust hood has been correctly fitted before allowing the motor to run.

Supplied with re-grindable knives, 100mm diameter dust extraction outlet, blade setting tool, cable and plug. Light Enough to be Portable 8″ Planing Capacity 8″ x 5″ Thicknessing Capacity Full Cutter Guarding Tilting Fence 100mm Extraction Outlet.

Specification.

  • Planing width: 200mm
  • Length of tables: 740mm
  • Max depth of cut: 3mm
  • Fence tilt: 90 to 45degees
  • Table height: 360mm
  • Thickness depth: 5 to 125mm
  • Length of thickness table: 270mm
  • Feed speed: 8m/pr min
  • Max depth of cut: 2mm
  • Cutter block speed: 8000rpm
  • No of knives: 2
  • Motor: (carbon brush) 1500watt
  • Dimension: 790mm x 420mm x 470mm
  • Weight: 28kg
  • Extra carriage charges may apply to Scottish Highlands & Islands, please enquire.

Additional information

Set of replacement blades

Replacement cutter blades

Call Now Button
Enquire Now
Shopping Basket
There are no products in the cart!
Subtotal
£0.00
Total
£0.00
Continue Shopping