Reduced Price

W014 Floor standing router table

£179.00 Inc. VAT

SKU: W014
Free Delivery On This Item

BRIEF DESCRIPTION

Charnwood W014 router table with feather boards & mitre crosscut guide.

 

SKU: W014 Categories: ,

PRODUCT VIDEO

YouTube video

Description

W014 Floor standing router table can be used with any 1/4″ or 1/2″ router

  • Floor standing router table.A versatile floor standing router table for inverted table routing. Can be used with any 1/4″ or 1/2″ sized router. The table top is made from a single piece of 35mm thick laminated MDF, to provide a flat and durable surface to work on. The mounting plate is made from a tough plastic which can be drilled to mount any router. The plate is held in place by magnets allowing tool free removal of the router from the table, when making adjustments or changing cutters. Two insert rings allow the diameter of the aperture to be reduced when working with smaller diameter cutters.Secure clamping of the work piece is achieved by setting the 2 fence mounted featherboards, to hold the work down against the table top and the front featherboard to hold the work up against the fence. Using this method edge mouldings can safely be cut onto small pieces such as beading or picture frames.For cutting across grain, or tenons, a metal mitre fence is supplied which runs in a T-slot along the front of the table. The mitre fence has stops at 45 degrees each way and at 90 degrees.The guide fence has two adjustable faces which can be moved to match the diameter of the cutter. Two scales in the surface of the table allow fast and accurate setting of the fence.At the rear of the fence is an outlet for dust extraction.

    Supplied with 3 feather boards, mitre guide, lead in pin for curved pieces, 68mm diameter extraction outlet. Use our 100/75RC to convert for 100mm diameter extraction hose.

    Table Size 800mm x 600mm
    Table Apertures 97, 67, 32mm
    Table Height 870mm
    Dust Outlet 68mm
    Mitre Guide T Slot (W x D) 19mm/23.5mm x 9.5mm
    Dimensions (WxDxH) 800mm x 600mm x 1020mm
    Weight 24kg
    Assembly Time Required 30 Minutes
    Warranty 1 Year
    Rating Light Trade

    Available as an optional item, our NVR switch is recommended as a safety device to prevent the operator from having to reach underneath the table to start and stop the router.

    Extra carriage charges may apply to Scottish Highlands, please enquire.